PedalyzePedalyze
Online bike fitting

Your bike fit measured, not guessed

Pedalyze checks your position against professional fit ranges in under a minute. No studio visit, no €200 session, no waiting for an appointment.

Fit reportSample analysis
Fit report
1

Knee stays quite bent at the bottom β€” saddle is likely too low.

2

Hip is very open β€” comfortable, but costs aerodynamics.

3

Arms are tucked under the torso β€” reach may be too short.

Stop guessing. Ride further without the pain.

Pedalyze brings precision biomechanics to your home setup β€” at a fraction of the cost of an in-studio fit.

No stickers or markers needed

Simply upload a photo in your normal kit. AI pose estimation pinpoints your hip, knee, ankle and shoulder joints automatically in seconds.

Spot fit factors linked to discomfort

Instantly measure your exact saddle height, knee flexion and KOPS β€” angles commonly associated with knee pain, lower back fatigue and hand numbness.

Pro fit ranges, made simple

Compare your position against proven biomechanical standards used by professional bike fitters. Get clear pass, warn or fail feedback on every angle β€” then share a link so your own fitter can review it with you.

Pedalyze vs. in-studio bike fit

A quick screening for the common issues β€” saddle height, reach, bar drop. Not a replacement for a certified fitter if you're dealing with pain, injury or asymmetries.

In-studio fitPedalyzeBest value
Cost€100–350 per session1 free report every 7 days, then €29 one-time
Time required2–3 hours, plus travel and schedulingUnder 60 seconds, from your living room
Equipment neededIn-person studio visit and specialised rigsJust your phone camera
Re-checking after gear swapsBook and pay again for a new bike or shoesRe-analyse any time you change gear
Analysis methodIn-person fitter's eye and goniometerAI pose estimation checked against biomechanical fit ranges
Post-fit checkRequires booking a follow-up consultationInstant re-check after adjusting your saddle or stem

Fit-critical angles, measured in seconds β€” no appointment needed.

Check my fit now β€” it's free
Real analysis

See a real report

This is an actual Pedalyze analysis β€” the same photos, angles and tips you'll get for your own fit.

measured on the rider's left side
  • Heads up:No clear vertical reference (door frame, wall edge) in the shot, so camera tilt could not be checked. Angles assume a level camera.
  • Knee flexion (6 o'clock)25.8Β°
    In range

    Target 25–35Β°

    Measured knee angle: 154Β°. Flexion = 180Β° βˆ’ 154Β° = 25.8Β°.

    No adjustment needed
  • Hip angle115.5Β°
    Out of range

    Target 45–75Β°

    Hip is very open β€” an upright position. Fine for comfort, costs aerodynamics.

    An overly open hip pushes your torso upright, adding frontal area and drag.

  • Torso angle from horizontal51Β°
    In range

    Target 40–55Β°

    No adjustment needed
  • Elbow angle164.6Β°
    In range

    Target 150–165Β°

    No adjustment needed
  • Shoulder angle64.9Β°
    Out of range

    Target 80–100Β°

    Arms are tucked under the torso; reach may be too short.

    A short reach loads the lower back and can restrict breathing.

69

Fit Score

Needs some work

Improves as you work through the tips below.

Analysis confidence

HighΒ·86%

  • βœ“Side-on image
  • ⚠Camera tilt could not be verified
  • βœ“Full body in frame
  • βœ“Joints clearly visible

How much to trust the measured angles, based on capture quality and how clearly each joint was detected.

Tips to improve your fit

Ranked so you tackle the biggest issues first.

Fix first2
  • 1
    Hip angle6 o'clock (bottom of stroke)

    Hip is very open β€” an upright position. Fine for comfort, costs aerodynamics.

    An overly open hip pushes your torso upright, adding frontal area and drag.

  • 2
    Shoulder angle6 o'clock (bottom of stroke)

    Arms are tucked under the torso; reach may be too short.

    A short reach loads the lower back and can restrict breathing.

Worth fine-tuning1
  • 1
    KOPS offset (3 o'clock)3 o'clock (crank horizontal)

    Knee sits ahead of the pedal spindle β€” try moving the saddle back.

    Knee ahead of the spindle increases strain on the front of the knee.

Made this tweak? Upload a new photo to re-test your fit.

Upload new photo

How it works

Four steps, and you can repeat the last two as often as you want.

1

Take two photos

Side-on, with the cranks at 6 and 3 o'clock. Follow the capture guide on screen.

2

Get your fit analysis

Pedalyze measures your position and shows which angles are outside the reference range.

3

Make an adjustment

Use the recommendations to change your saddle, bars or cleats.

4

Test again

Upload a new photo and see if your position improved.

Your bike fit is one photo away.

It takes less than a minute to get your first analysis.

Sign up free

We use cookies for analytics to understand how visitors use Pedalyze. You can accept or decline. Privacy Policy